JetModul
The JetModule in an integrable process technology unit for automated CO2-Snow Jet Cleaning.
It can either be utilized as a mobile appliance or a stationary construction. It qualifies for the use in robot controlled enrironments or linear motion systems as a cleaning system prior or after any process of machining.
A single supply unit is designed to drive single nozzles and nozzle arrays with up to 15 nozzles.
It can either be utilized as a mobile appliance or a stationary construction. It qualifies for the use in robot controlled enrironments or linear motion systems as a cleaning system prior or after any process of machining.
A single supply unit is designed to drive single nozzles and nozzle arrays with up to 15 nozzles.
Specifications
| Dimensions |
650 x 550 x 1420 mm |
| Empty weight |
approx. 75 kg |
| CO2-supply |
Standpipe bottle, liquid gas tank, bundled bottles |
| CO2-consumption |
max. 1,25 l/min (with 0,4mm capillary) |
| Standard-capillary |
Ø 0,35 mm |
| Compressed air |
pressure-dependent, typically 1250 l/min at 6 bar |
| Working pressure |
Up to 16 bar |
| Hose connector |
Compressed Air Quick Connector NW 7,2 |
| CO2-connector |
6mm tube fitting |
| Power supply |
230 V / 16 A |
| Housing material |
Stainless steel |
Accessories and components
Nozzle Array with 5 nozzles
Nozzle Array with 15 nozzles exemplary mounted on a robot arm
The optional CO2 Alarm sensor is used for ambient air monitoring. It
permanently monitors the ambient air. If the CO2 concentration exceeds
a specific value an alarm signal will be generated.
Heating system to treat the substrate. At this the jacketed jets of the nozzles are heated up while and after cleaning to protect the substrate from condensation.
The acp CO2-Purifier System ist an optional stand alone unit, that provides particulate and chemical conditioning of the CO2-media for high purity applications such as wafer cleaning.